Compact DALI-2 control module with 1 switching input. For installation. 59mm long, 33mm wide, 15mm deep. Protection class: IP 20. DALI current consumption 4.6mA. DALI-2 certified. DALI-2 is the newest generation of the DALI standard with an extended range of functions. DALI-2 devices also include all previous DALI functions and are therefore backwards compatible. Compact DALI-2 control module with 1 switching input for 230V AC. The DL2-TK1L is powered by the DALI bus, no separate supply is required. The connection to the DALI terminals is polarity-independent. Galvanic isolation between switching input and DALI interface. Multimaster capable, multiple modules can be installed on the same DALI line. Integrated DALI-2 Application Controller Individual DALI commands, effective range and switching functions can be assigned to each input. In addition to the standard DALI commands, the application controller also enables DALI DT8: Tunable White and RGB(W) control. Easy integration with DALI-2 pushbutton instance. Supports short press, long press (with repeat for dimming) and toggle. In addition to buttons, it is also suitable for switches. Alternative pushbutton function, the input can also be assigned a second function that can be activated/deactivated via a scene command on the DALI bus. Configurable ‘power-up’ behavior. Simple configuration via a DALI ­interface and DALI cockpit software tool. Application controllers and instances can be active at the same time. Application and function: The DL2-TK1L serves as a universal module for controlling DALI compatible lights. The function of the switching input can be set individually. The settings can be made using the DALI Cockpit software tool. Like other Lunatone control devices, the settings can be made using the DALI Cockpit software tool. In principle, a distinction is made between the application controller and the DALI-2 instances. The Application Controller leads to direct DALI control commands that are immediately executed by the DALI drivers. The DALI-2 instances generate event messages that are interpreted and further processed by higher-level control units (ELTAKO FD2G14, ELTAKO FD2G71L-230V, WAGO, Beckhoff, ­LUNATONE DALI-2 KNX Gateway). Application controllers and instances can be active at the same time. Delivery condition: When delivered, a basic configuration is already implemented (factory settings). If necessary, this can be changed and adapted to the current application.