More results...
Snelle hulp - onze servicenummers
Deze pagina is verouderd en wordt niet meer bijgewerkt. Bezoek onze nieuwe productsectie voor de meest recente informatie over dit product:
FARP60-230V
1- and 2-level outdoor wireless repeater
Outside wireless repeater 1 and 2 levels, 60x46mm, 30mm deep. Only 0.7 watt standby loss. Supply voltage 230V. This repeater is only needed if the building conditions prevent undisturbed reception or the distance between the wireless pushbutton and receiver is too great. The 1-level mode is activated ex works. Only the signals from sensors and actuators are received, tested and retransmitted at full transmit power. Wireless signals from other repeaters are ignored to reduce the data volume. Switchover to 2-level mode is carried out by removing the cover (loosen two screws on the front panel) and repositioning the jumper flush right. In this setting, wireless signals from other 1-level repeaters are also processed. A signal may therefore be received and amplified twice. A red LED blinks briefly to indicate all the wireless signals detected. Wireless repeaters need not be taught-in. They receive and amplify signals from all wireless sensors within their reception area. On the underside there is an M12 screw for a waterproof mains connection. The protection class is IP54, the allowable ambient temperature is -20°C to +55°C. For screw mounting.
* Recommended retail price plus VAT.
Wireless 2-way flat pushbutton with energy generator
German Socket (Type F) DSS with socket outlet front and USB charging ports, pure white glossy
2-hole UAE/IAE cover for E-Design55 frames, pure white glossy
TV/RF cover for E-Design55 frames, pure white glossy